編號 | 說明 | 封裝 |
---|---|---|
CY2332 | New Generation USB PD3.0/PPS Protocol Controller with NMOS Driver | W-DFN3030-14/W-QFN4040-24 |
CY2312 | USB PD3.0/PPS Protocol Controller with QC4.0 and Legacy Capability | TSSOP-16L /TSSOP-20L |
CY2311 | USB PD3.0 Protocol Controller with Legacy Capability | TSSOP-16L/ 20L and TQFN-24L |
CY2211 | USB PD2.0 Protocol Controller with QC and Legacy Capability | TSSOP-16L /TSSOP-20L |
CY2568 | An USB PD3.0 Sink Controller | TSSOP-16L |
CY2528 | An One-Channel USB PD Sink Controller | WDFN-8L |
CY2813 是整合 USB Type-CTM 和 QC2.0 和 BC1.2 DCP 快速充電辨識晶片 | |
CY2813主要電路特色為: | |
● | USB Type-CTM v1.1 Cable Detect |
● | Support Source and Source/Sink |
● | Built-in discharge path for QC & Type-CTM |
● | Pass QC 2.0/UL certification |
● | Fully support Quick Charge 2.0: |
Class A: 5V, 9V, and 12V | |
Class B: 5V, 9V, 12V and 20V | |
● | Fully support BC1.2 DCP mode |
● | Fully support Legacy Devices Fast Charging |
● | Automatic Selection for different mode |
● | ±8KV ESD Protection on DP/DM |
● | TSSOP-10L |
CY2518 Highly-Integrated e-Marker Chip for USB Type-CTM Cables | |
CY2518主要電路特色為: | |
● | USB Type-CTM 1.2 and PD 2.0/3.0 compliant |
● | Support SOP’ and SOP” with the same chip |
● | Support extended messages |
● | BMC transmitter with EMI control |
● | BMC receiver with high noise immunity |
● | Built-in isolators (diodes) and Ra resistors |
● | Built-in LDO without external capacitor |
● | Embedded MTP for e-Marker data |
● | MTP programming through CC line or I2C |
● | Programmable I2C master/slave |
● | Up to 4 programmable GPIO pins |
● | Support Vconn operation at 3V- 5.5V |
● | Low standby current below 200uA |
● | Low operation current below 3mA |
● | Ambient temperature range: −40°C to 85°C |
● | Package: WDFN-8L |
CY2528 An one-Channel USB PD Sink Controller | |
CY2528主要電路特色為: | |
● | USB Type-CTM 1.2 and PD 2.0/3.0 compliant |
● | Support PD Sink function |
● | BMC transmitter with EMI control |
● | BMC receiver with high noise immunity |
● | Built-in LDO without external capacitor |
● | VC1 power operating at 3V to 5.5V |
● | Up to 3 select pins |
● | Low operating current below 3mA |
● | Ambient temperature range: −40°C to 85°C |
● | Small Package: 2*3 WDFN-8L |
CY1113 是整合802.3 af 握手協議和DC/DC Converter的高效能二合一晶片 | |
CY1113主要電路特色為: | |
● | IEEE 802.3af compliant PD controller |
● | Power delivery up to 13 Watt |
● | Integrated 100V 0.65Ω hot swap MOSFET |
● | Embedded 150V 0.3Ω Switching MOSFET |
● | Accurate 140 mA typical inrush current level |
● | Programmable DC/DC switching frequency |
● | Programmable UVLO of hot swap switch |
● | Current mode pulse width modulator |
● | 80% max duty cycle w/ internal compensation |
● | Support for isolated/non-isolated converters |
● | Seamless support for local power down to 9V |
● | OCP, SCP, OVP and OTP protections |
● | TSSOP-20L 173 mil with exposed pad |
USB Type-C Power Delivery Controller with Legacy Capability | |
CY2211主要電路特色為: | |
● | Compliant with USB PD Rev 2.0 v1.2 |
● | USB-IF Certificate TID: 1040016 & 1040017 |
● | Vout 0.1V/step from 5 to 20V without mismatch |
● | Support up to 6 PDO Outputs |
● | CC/CV included for direct feedback control |
● | Output voltage with dynamic OVP/UVP |
● | Cable compensation for different load condition |
● | Support e-Marker cable detection and Vconn |
● | One-Time-Programming for configuration and ID |
● | Support OCP/SCP/OTP Protections |
● | Support Synchronous Rectifier(CY2211-20L) |
● | Built-in 5V/1.8V LDO |
● | Low standby current below 500uA |
● | Maximum 32V input voltage rating |
● | Ambient temperature range: −40°C to 85°C |
● | Package: TSSOP-16L/ 20L |
● | Support non-USB PD and auto detection with: |
1. Qualcomm QC 2.0 built-in | |
2. Apple Legacy built-in | |
3. BC 1.2 Legacy built-in |
ON-Semi USB PD Car Charger |
SouthChip(南芯)USB PD Car Charger |
ATK USB PD Car Charger |
USB PD3.0 Protocol Controller with Legacy Capability | |
CY2311主要電路特色為: | |
● | Compliant with USB PD Rev 3.0 v1.1 |
● | USB-IF certificated TID: 1061013 & 1060013 |
● | Support Vout 20mV/step from 3.3 to 20V |
● | Support Current limit 50mA/step up to 6A |
● | USB PD transceiver with high noise immunity |
● | Built-in CC/CV controller |
● | Support e-Marker cable detection |
● | Built-in Vconn switch with OCP protection |
● | Cable compensation for different load condition |
● | Programmable for configuration and ID code |
● | Support OCP/SCP/OTP/UVP with auto-restart |
● | Support I2C bus and GPIO functions (TQFN only) |
● | Built-in 5V/1.8V LDO |
● | Low standby current : 550uA |
● | Support Synchronous Rectifier (20L & 24L only) |
● | Maximum 32V input voltage rating |
● | Package: TSSOP-16L/ 20L and TQFN-24L | ● | Support non-USB PD protocol options: |
1. Qualcomm QC 3.0/2.0 built-in | |
2. Apple Legacy built-in | |
3. BC 1.2 Legacy built-in |
USB PD3.0/PPS Protocol Controller with QC4.0 and Legacy Capability | |
CY2312主要電路特色為: | |
● | Compliant with USB PD Rev 3.0 v1.2 |
● | USB-IF PD3.0/PPS Certificated TID: 1100011 |
● | Qualcomm QC4+QC3 Certificated |
● | Support Vout 20mV/step from 3 to 20V |
● | Support Current limit 50mA/step up to 6A |
● | USB PD transceiver with high noise immunity |
● | Built-in CC/CV controller |
● | Support e-Marker cable detection |
● | Built-in Vconn switch with OCP protection |
● | Cable compensation for different load condition |
● | Programmable for configuration and ID code |
● | Support OCP/SCP/OTP/UVP with auto-restart |
● | Built-in 5V/1.8V LDO |
● | Low standby current : 550uA |
● | Support Synchronous Rectifier(CY2312-20L) |
● | Maximum 32V input voltage rating |
● | Package: TSSOP-16L/ TSSOP-20L |
● | Support non-USB PD protocol options: |
1. Qualcomm QC 3.0/2.0 built-in | |
2. Apple Legacy built-in | |
3. BC 1.2 Legacy built-in |
CY2568 是 USB PD3.0 Sink Controller | |
CY2568主要電路特色為: | |
● | Compliant with USB PD Rev 3.0 v1.2 |
● | USB-IF certificated TID: 1090012 |
● | Support PDO selection by GPIO pin setting |
● | Support CC polarity indication |
● | Support Power capability selection |
● | Support Power indication |
● | Max. 32V input with built-in 5V/1.8V LDO |
● | BMC transmitter with good eye diagram |
● | BMC receiver with high noise immunity |
● | Programmable through I2C and CC channel |
● | Support I2C bus for debugging |
● | Low operating current |
● | Package: TSSOP-16L 173mil |
New Generation USB PD3.0/PPS Protocol Controller with NMOS Driver | |
CY2332主要電路特色為: | |
● | Compatible with USB PD Rev 3.0 V1.2 |
● | USB-IF PD3.0/PPS Certificated TID = 1090028 and 78 |
● | Qualcomm QC4/4+ Protocol Certificated |
● | OTP (One-Time-Programmable) for Main Firmware |
● | MTP (Multi-Time-Programmable ) for System Configuration |
● | Built-In Regulator for CV and CC Control |
● | Support SCP/OTP/OVP/UVP with Auto Restart |
● | Support Power Saving Mode |
● | External N-MOSFET Control for VBUS Power Delivery |
● | Support e-Marker Cable Detection |
● | Operating Voltage Range: 3.3V to 20V |
● | Fewest External Component Count |
● | Totally Lead-Free & Fully RoHS Compliant |
● | Halogen and Antimony Free. “Green” Device |
● | Package:W-DFN3030-14/W-QFN4040-24 |
CY2823 是整合 DC/DC 和 Type-C 和 QC2.0 等功能車用快速充電辨識晶片 | |
CY2823主要電路特色為: | |
● | 4.5V to 36V Input Voltage Range |
● | 3A Continuous Output Current |
● | 100m ohm Internal Power MOSFET Switch |
● | Fixed 420kHz Switching Frequency |
● | Cycle-by-Cycle Current Limit |
● | Over-Current/ Temperature Protection |
● | Thermally Enhanced Packages |
● | USB Type-C v1.1 Cable Detect |
● | Built-in discharge path for QC & Type-C |
● | Support QC 2.0 Class A: 5V, 9V, and 12V |
● | Support BC1.2 DCP mode |
● | Support Legacy Devices Fast Charging |
● | Automatic Selection for different mode |
● | ±8KV ESD Protection on DP/DM |
● | Package SOP-8EP/QFN-12L |