USB PD3.0 Protocol Controller with Legacy Capability
|
CY2311主要電路特色為:
|
● |
Compliant with USB PD Rev 3.0 v1.1 |
● |
USB-IF certificated TID: 1061013 & 1060013 |
● |
Support Vout 20mV/step from 3.3 to 20V |
● |
Support Current limit 50mA/step up to 6A |
● |
USB PD transceiver with high noise immunity |
● |
Built-in CC/CV controller |
● |
Support e-Marker cable detection |
● |
Built-in Vconn switch with OCP protection |
● |
Cable compensation for different load condition |
● |
Programmable for configuration and ID code |
● |
Support OCP/SCP/OTP/UVP with auto-restart |
● |
Support I2C bus and GPIO functions (TQFN only) |
● |
Built-in 5V/1.8V LDO
|
● |
Low standby current : 550uA
|
● |
Support Synchronous Rectifier (20L & 24L only)
|
● |
Maximum 32V input voltage rating
|
● |
Package: TSSOP-16L/ 20L and TQFN-24L
|
● |
Support non-USB PD protocol options:
|
|
1. Qualcomm QC 3.0/2.0 built-in
|
|
2. Apple Legacy built-in
|
|
3. BC 1.2 Legacy built-in |